Commercial

Custom vanity 1

  • The custom made vanity 1 is one basin manufactured to a standard specification of 1000mm length by 560mm breadth but the length and width can be varied accordingly.
  • With custom made vanity 1, the back splash and side splash is optional.
  • Different basins can be specified.
  • External measurements can be altered as required.
  • Facias are produced to a minimum of 30mm and a maximum of 300mm.

CLICK ON IMAGE TO SEE FACT SHEET & SPECIFICATIONS

Custom vanity 2

  • The custom made vanity 2 is two basins manufactured to a standard specification of 1500mm length by 560mm breadth but the length and width can be varied accordingly.
  • With custom made vanity 2, the back splash and side splash is optional.
  • Different basins can be specified.
  • External measurements can be altered as required.
  • Side and back Splashes are produced to a maximum of 100mm.
  • Facias are produced to a minimum of 30mm and a maximum of 300mm.
  • The minimum spacing between the left hand side, right hand side and between basins is 100mm.

Custom vanity 3

  • The custom made vanity 3 is three basins manufactured to a standard specification of 2000mm length by 560mm breadth but the length and width can be varied accordingly.
  • With custom made vanity 3 the back splash and side splash is optional.
  • Different basins can be specified.
  • External measurements can be altered as required.
  • Side and back Splashes are produced to a maximum of 100mm.
  • Facias are produced to a minimum of 30mm and a maximum of 300mm.
  • The minimum spacing between the left hand side, right hand side and between basins is 100mm.

Custom vanity with towel rail

  • The custom made vanity with towel rails length and width can be varied accordingly.
  • With custom made vanity with towel rails different basins can be specified.
  • External measurements can be altered as required.
  • Facias are produced to a minimum of 30mm and a maximum of 300mm.

Corri channel

  • The Corri channel is one basin manufactured to a standard specification of 800mm length by 500mm breadth and to a depth of 60mm, with a fascia up to 300mm although external dimensions can be altered.
  • The internal dimensions of the Corri channel basin can be made to specifications.
  • The slop of the angle can also be made to specifications.
  • The length of channel can be made to specification with the minimum 600mm and maximum being 3000mm.
  • With the Corri channel basin, the back splash and side splash is optional.
  • Different basins can be specified.
  • External measurements can be altered as required.
  • Facias are produced to a minimum of 30mm and a maximum of 300mm.

32 Section Street  |  Paarden Eiland  |  7405  |  Cape Town

Tel: +27 21 511 0768  |  Email: marblecastsales@marblecast.co.za

All Content  Copyright Marblecast 2014. All Rights Reserved.

Web Maintenance & SEO by Cape Business Online

Made in South Africa

Use of the website and/or any dealings with Marblecast irrevocably binds the customer to our terms and conditions.